background image

7

PRESTIGE 2100

US

• 

Forget to exfoliate? Pressed for time?

 

We recommend using our 

eXmitt® Pre-tan Body Buff

 to instantly clear away any dead 

skin cells, clean the skin of any barriers, and balance the pH level of the skins surface. 

Infused with our proprietary pH balancing formula, the 

eXmitt®

 is designed to gently 

exfoliated and buff the skin while accelerating DHA color development without the 

need for water.

8. 

 

General maintenance after the application of spray 

tanning solution

• 

Once dry, apply 

Post Sunless HydroFirm™ Moisturizing Spray

 to add moisture, seal 

sunless results and boost the DHA reaction.

• 

You should refrain from showering as long as possible (up to 24-hours). As with all 

DHA products, sunless color begins showing development approx. 4-hours after 

application and continues to darken for up to 24-hours.

• 

If you must shower during the 4 to 24-hours following the application, WARM 

WATER RINSE ONLY. The use of soap can inhibit the full development of DHA color.

• 

Important:

 Cosmetic instant bronzers will wash away during the first shower. Pools 

and spas that utilize chlorine can cause fading.

• 

When showering after 24-hours, use only a mild pH balancing shower gel such as 

pH 

Balancing Shower Cleanser™

. Refrain from using scrubs or high pH soaps as these 

will strip away your sunless color.

• 

Extend and build color between sessions with a daily application of 

Color Extending 

Pro-Long™ moisturizer

.

 

Need Touch-ups?

 Use 

Bronzing 4-Faces™

 or any other Norvell® self-tanning product 

between full sessions.

i

NOTE:

 The tips listed herein are instructions to achieve the very best sunless 

tanning results; however, you can still achieve beautiful 

just off the beach™

 

color as a Norvell® walk-in client.

Summary of Contents for PRESTIGE 2100





















Reviews: