16
PRESTIGE 2100
US
Malfunction
Cause
Remedy
Atomization too
coarse
•
Material volume setting
turned too far clockwise
•
Nozzle contaminated
•
Too little pressure build-up in
container
•
Air filter heavily soiled
•
Amount of air too low
➞
Turn material volume
setting anticlockwise
➞
Clean
➞
Tighten container
➞
Replace
➞
Increase air volume
Uneven spray
pattern
•
Spray tanning solution in the
container is running out
•
Nozzle seal worn
•
Air filter heavily soiled
➞
Refill
➞
Replace
➞
Replace
Excessive overspray
•
Distance too large
•
Material volume setting
turned too far clockwise
•
Amount of air too high
➞
Reduce distance
➞
Turn material volume
setting anticlockwise
➞
Reduce air volume
Spray tanning
solution runs down
body
•
Too much spray tanning
solution applied
•
Spray paths overlap too much
•
Spraying distance too small or
spray movement too slow
➞
Carefully dab affected
points with a towel,
reduce flow setting if
required and lightly
overspray again
The tan is patchy or
blotchy
•
Skin was not correctly
prepared
•
Spray movement not even
enough
➞
Correct by lightly
overspraying
Customer's skin
appears orange
•
Too much spray tanning
lotion applied
•
Skin was not correctly
prepared
•
High sensitivity to active
ingredient DHA
➞
Remove spray tanning
lotion from the skin.
Prepare skin correctly for
new application, reduce
flow setting
➞
Use another shade with
lower concentration of
DHA
System no longer
functions during
use
•
System overheated
➞
Unplug the power plug,
let the system cool down
approx. 30 minutes, do not
bend the hose, check the
air filter, do not cover the
intake slots
