Norton MTA 36, Operating Instructions And Spare Parts List

Page: 9 / 22

9
2.4 Technical Data
Engine Honda GX200, 4 strokes, 1 cylinder, 6,5HP (4kW)
Filter Dual Filter
Fuel Regular unleaded
Oil
Honda 4-Stroke, or equivalent high detergent, premium quality
motor oil certified to meet or exceed U.S. automobile
manufacturer’s requirement for service classification SG, SF. (SG,
SF designated on the oil container).
SAE 10W-30 recommended
Starter Manual pull chord
Typ of spark plug
CR5HSB (NGK)
U16FSR-UB (DENSO)
Type of tool Blade or plate
Max. tool diameter 865 mm
Blade shaft speed 91 min-1
Machine dimensions 1790x915x790 mm
Max. operating weight 80 kg
Sound pressure level 85 dB (A) (ISO EN 11201)
Sound energy level 94 dB (A) (ISO EN 3744)
3 Assembly and commissioning
The machine is delivered fully equipped. It is ready for operation after assembly of the tool and
adjustment of the machine arm, and after connection to the appropriate power supply.
3.1 Safety guard ring and handle
To avoid the guard ring to be damaged during the transportation, it is transported disassembled
from the machine. To assemble it, follow these points:

Fit the section of the guard ring with the large welded plate at the front side of the reducer (with
M10 screws and the 17mm wrench).

Fit the two small plates of the guard ring on the right and left side of the handle (with M10
screws and the 17mm wrench).

Fit also the second locking screw of the belt guard (with M8 screws and the 13mm wrench).
Unlock
the locking lever of the handle. To adjust the height of the rubber grips to the operator’s
size, move the handle backwards. Fix the handle on the desired position by tightening the locking
lever.
3.2 Tool assembly
Only NORTON blades or plate with a maximum diameter of 865 mm can be used with the MTA36.
Before mounting a new tool into the machine, switch off the machine.
Screw the 2 M8-screws per blade using a 13mm wrench to assemble the blade on the arm. To