Norton MTA 36, Operating Instructions And Spare Parts List

Page: 8 / 22

8
The machine and its component parts are assembled to high standards assuring long life and
minimum maintenance.
2.2 Purpose of use
The Clipper Mechanical Trowel MTA36 is designed for onsite finishing operations on wet concrete
floors. It is not designed for any other purpose.
2.3 Layout
Handle (1)
Jig welded steel construction including 2 rubber grips. A dead-man handle (2) allows the operator to
work safely and to stop the machine at any moment. The angle of the machine arm can be adjusted
to operate the machine comfortably.
Pitch of the blades (3)
The pitch of the blades is controlled over a hydraulic pump on the handle.
Belt drive and belt cover (4)
A centrifugal clutch inside the motor pulley drives the gear shaft through a V-Belt. It allows to
gradually engage the tool rotation. The drive assembly is enclosed in a metal guard.
Safety guard ring (5)
A safety guard ring protects the operator from the rotation of the tool while offering an optimum
view of the working progress.
Thermal Engine (6)
The machine has a GX200 Honda engine, with 4,7kW. An emergency shut down switch near the
operator allows an immediate stop of the machine in case of danger.