Norton MTA 36, Operating Instructions And Spare Parts List

Page: 6 / 22

6
1 Basic Safety Instructions
The MTA36 is exclusively designed for the finishing of wet concrete floors mainly on construction
sites.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk shall
be borne entirely by the user. Observing the operating instructions and compliance with inspection
and servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the machine:
Read operator’s instructions
Ear protection must be worn
Hand protection must be worn Eye protection shall be worn
Rotation direction of the blade Pump on Pump off
Danger: risk of cut Never move the machine with the blade running
idle.