Norton Clipper C914P, Owner'S Manual

Page: 8 / 48

8
Remove the saw from the pallet. Inspect the machine for concealed shipping
damaged. Read and understand ALL instruction included in this manual.
Failure to understand and follow the instruction covered in this manual can
result in injury to persons or damage to the machine.
DO NOT LIFT THE SAW BY THE HANDLE BARS
Loosen the Handle Bar Retaining Jam Nuts and Bolts. Remove the Handle
Bars from the Frame and rotate 180° so that the Hand Crips will be towards the
Operator. Slide the Handle Bar Assembly into the frame, adjust to the
Operator’s desired height, and align the nearest Hole in the Handle Bar
Assembly with the top Retaining bolt. Tight both Handle Bar Retaining Bolts
and Tighten the Jam Nuts.
See Figure:
Handel Bar Assembly
¾” Garden Hose
Fitting
Quick Detach
Water Fitting with
Valve
Handle Bar Attachment
Hardware
Engine On/Off Switch
Wrench and
Wrench Holder
Serial Number Plate
Water Tank Quick
Detach Fittings
Blade Guard Water
WYE and Nozzels