Norton Clipper C914P, Owner'S Manual

Page: 32 / 48

32
IV. PARTS LIST SECTION
A. Ordering Information
1. List model number and serial number of machine.
2. List UPC (Universal Product Code) number and description. Do not list the
item number.
3. Wherever alternate parts are shown due to product improvement, inspect
the part you have and provide additional description as necessary.
4. Specify mode of shipping desired, such as, parcel post, truck, UPS, FedEx,
best way, etc.
For the nearest Norton Clipper distributor call
254-918-2310
Common Replacement Parts
UPC Description QTY NOTES
70184609020 Splash Guard Kit C914P/CS352 1
Includes:
Splash Guard (1) NOT Sold Separately
70184681605 SCR M10x30 1.5 DIN933 (2)
7018461610 Washer M10 DIN125 Flat (4)
70184628215 NUT M10 1.5 DIN 985 Lock (2)
70184609011 Collar Blade Kit C914P/CS352 1
Includes
Loose Collar NOT Sold Separately
70184674556 PIN Drive 3/8" x 1" (1)
Tight Collar (1) NOT Sold Separately
KEY 6x6x12 (1)
70184609012 Blade Shaft Nut M14 2.0 Left Hand
Thread (1)
70184609012 NUT M14 2.0 DIN 934L Left Hand Thrd. 1
Blade Shaft Nut M14 LEFT HAND THREAD
70184609013 Wrench Multiple 1
70184609009 Belt XPZ612 (3) 1
Set of Three (3) Belts
70184609014 Wheel Front C914P/CS352 Kit (1) 2
Includes
70184674102 Wheel 4"x3/4 (1)
70184650129 Washer 3/4 SAE (2)
70184674553 Pin Cotter 1/8" x 1 ‐ 1/2" (1)
NOTE: One (1) Wheel and Hardware in Kit
00310351798 Water Tank Complete 1
Includes:
Water Tank
00310006560 Stopper (Cap)
NOTES: Water Tank Not Sold Separately
00310005495 Wheel 200x23x25mm 2
Sold as EACH
NOTE:
All Parts Are Sold As Individual (each) Unless Noted Otherwise By A (x) In
The Description Where x= The Quantity Included. For example, 70184609009
Belt XPZ612 (3) three (3) Belts are included
. Kitted items are shown in a phantom
lined box within the parts drawing.
Blades Use Only Norton Diamond Blades.
Contact your local Norton
Clipper Distributor or our Customer Service at 254-918-2310 for the best blade for
the application.
All parts are designated as either Service Parts (S) or Wear Parts (W) in the Type
column in the parts listing. Wear parts are worn out through normal use of the
machine. The wear period depends on the intensity of use of the machine,
handling, and maintenance of the machine. Wear parts must be serviced and
eventually changed following the indications of the manufacturer. Any wear due to
normal use of the machine will not be considered as a case of warranty for items
designated as Wear Parts (W). For best performance and life Genuine Norton
Clipper replacement parts should always be used. Changes to part specifications,
are subject to change without notice.