7
Now install the
second stem
element in the bow
. Proceed
in the same way as in the stern
Slide the stem element as far as
possible into the bow.
Then fold the flexible rod
upwards and clip it from below
into the cross-tube installed in
the hull.
Install
keel rod #1
(two open
ends and the arrow pointing
towards the bow is on the
forward position).
Push it from behind through the
sleeve on the hull before
clipping it to the stem element.
Again, push both as far as
possible
into the bow
. Make
sure everything sits
centrally
.
Take
keel rod #2
(with a
hemispherical end)
and push it
with the open end through the
sleeve under the front seat.
Then clip it onto the stem
element.
bow
bow
