12
IMPORTANT
:
Your boat is equipped with overpressure valves (the two red valves in the stern).
These will let out air in case the pressure exceeds too much. It is a security mechanism for
the extreme case. Do not test it willingly, but follow the guidelines.
Your boat is now fully assembled and ready for action.
In the following there will be described further instructions for optional deck and rudder
system. At the end of the manual you will find more instructions for safety, disassembling and
stowing the boat into the packing bag.
5 ) Installing the deck
Mount the optionally available deck from
the stern. Place it in such wise, the deck
just covers the Velcro on the boat.
It will overlap a little in the back.
(see picture on the left)
Then mount it completely and make sure
to tauten it.
Then shove the overlap underneath the
black cover at the stern.
The two little tubes are the openings for
the tripping lines of the rudder system, in
case you want to use it.
The deck is fully installed. Now you can attach the sprayskirts, which come with the 3-person
deck. Also optionally available is a cockpit cover for the middle cockpit.
