TELEPHONE OPERATION
TO PLACE A CALL IN TALK MODE
1.
Press the OK button on the handset. The LCD Display
will show CONNECTING... and then call timer starts
to count. The base IN USE LED indicator will light up. (Figure 11)
2.
Listen for a dial tone.
3.
Dial the telephone number. The phone numbers appear on the LCD Display
as you enter the number.
4.
When finished with your call, press the CANCEL button or place the handset
on the base unit.
TO PLACE A CALL IN STANDBY MODE (PREDIAL MODE)
1.
Ensure that the unit is in standby mode. The handset and base unit IN USE
LED indicator is off.
2.
Dial the telephone number.
3.
Press OK button to dial out.
4.
When finished with your call, press the CANCEL button or place the handset
on the base unit.
TO RECEIVE A CALL
NOTE:
If you are expecting incoming calls, the handset must be programmed to
DND OFF mode. See PROGRAMMING MODE section on page 24.
A. IF THE HANDSET IS ON THE BASE UNIT
1.
Since the Excursion
®
36570 features "Auto-Answer", simply pick up the
handset from the base cradle when the phone rings. The call timer starts to
count. The base unit IN USE LED indicator will light up.
2.
Start your conversation.
3.
To end your conversation, either press the CANCEL button or place the hand
set on the base unit.
B. IF THE HANDSET IS OUT OF THE BASE UNIT
1.
When the phone rings, press the OK button on the handset. The call timer
starts to count. The base unit IN USE LED indicator will light up.
2.
Start your conversation.
3.
To end your conversation, either press the CANCEL button or place the hand
set on the base unit.
LAST NUMBER REDIAL
A. REDIALLING FROM THE STORED LAST TELEPHONE NUMBERS
The unit can automatically store the last 10 telephone numbers dialed out.
14
02252A-1
36570/02252A-1.PUT
5/26/01, 11:35 AM
15
