10
02252A-1
(Figure 4)
BASE UNIT CONTROLS
1.
12VDC Adapter Jack:
A jack located on the rear side of the base unit used
for connecting the adapter to the base unit.
2.
TEL LINE Jack:
Accepts line cord to make connection with modular type
telephone outlet.
3.
T / P (TONE / PULSE) Switch:
Allows you to select the appropriate dialing
service. TONE for tone dialing or PULSE for rotary service.
4.
Charge Terminals:
Used for charging the handset battery. We recommend
that you clean these contacts periodically with an alcohol-moistened cloth or
cotton swab.
5.
PAGE Button:
Allows you to locate the handset when it is not on the base.
6.
CHARGE LED Indicator:
Lights up steadily when the handset is being
charged on the base. Turns off when the handset is removed from its cradle.
7.
IN USE LED Indicator:
Lights up steadily when the phone is in talk mode, or
during paging. Turns off when the handset is not in use.
DESKTOP USE:
Connect the telephone line cord to the TEL LINE
jack on the rear of the base unit and connect the
opposite end to the telephone modular jack.
(Figure 3)
BELT CLIP INSTRUCTION
Clamp the belt clip at the back of the handset as shown in Figure 4.
Belt Clip
36570/02252A-1.PUT
5/26/01, 11:35 AM
11
