041604A-1 45
MEMORY FULL DETECTION
The memory full condition occurs:
. If 15 minutes of recording time is reached, or
. If 59 message (i.e. Memo, OGM, ICM) have been recorded.
If there is an incoming call, the unit will answer at the 10
th
ring and announce “Memory full”. You can
erase any or all the messages remotely after listening to them.
NOTE:
Sometimes you may fail to escape from memory full condition when erasing a short message. In
this case, you must erase more messages(at least 1 minute message).
CALL SCREENING
You can listen to the caller leave their ICM and decide if you want to answer the call.
A. FROM THE HANDSET(Away From the Base Unit)
1.
When the Excursion
®
36288 rings, press the REMOTE button on the handset, The Excursion
®
36288
will immediately answer the call. You will hear your OGM followed by the caller’s message
through the handset receiver.
2.
If you decide to take the call, simply press the TALK button and begin speaking.
B. FROM THE HANDSET (In the Base Unit Cradle)
1. When the Excursion
®
36288 answers a call, you will hear your OGM followed by the caller’s
message through the base unit’s speaker.
2.
If you decide to take the call, simply pick up the handset. Begin speaking and the ICM recording is
stopped. The recorded message is stored in memory and the message count is incremented by one.
C. FROM THE EXTENSION PHONE
1. When
the
Excursion
®
36288 answers a call, you will hear your OGM followed by the caller’s
message through the speaker.
2.
If you decide to take the call, just lift the handset of the extension phone on the same line as the
Excursion
®
36288. The ICM recording is stopped and the recorded message is stored in memory
while the message count is incremented by one.
Summary of Contents for Excursion 36288
Page 51: ...041604A 1 51 ...
