background image

NORTHSTAR ORION

 

Owner’s Manual

26

▪    The breaker of the compartment lighting is 5 amps.
There is also an on/off button inside the cabin. 

▪    The breaker of the waste water system is 25 amps.
If your boat has an optional electric toilet system, the waste water 

tank can be emptied with the button indicated in the image. The 

waste water outlet valve is located on the port side of the aft 

storage area. This valve should only be opened offshore and 

when the waste water tank is to be discharged. 

▪    The breaker of water pump is 10 amps.
If your boat has a shower system, pressing this button will 

make the shower head in the aft and the sink tap inside the 

Orion 8 console usable.

▪    Radio breaker is 10 amps.
It can be equipped with an optional audio system. Consult the 

manufacturer’s owner’s manual.

▪    The GPS display breaker is 5 amps.
▪    There are two (2) 5 amps breakers as spare.

If a breaker consistently cuts the electrical current, please have 

your electrical circuitry checked by a professional.

All ORION RIBs are equipped with navigational lights that comply 

with the COLREGs (International Regulations for Preventing 

Collisions at Sea).

When not in use, keeping the allround light at its location under the 

lid is highly recommended to prevent the accidental damage.

Battery acid is corrosive, so you have to protect your eyes and 

skin if you have to work on it. You must rinse splashes of acid with 

freshwater and consult a doctor immediately. You can neutralize 

splashes of acid on the skin or clothes with acid transformer or 

soapsuds.

Check from time to time if the battery terminals have a tight fit and 

if there are any corrosion patches.

Batteries may produce explosive hydrogen gas. Keep all sparks, 

flames, and smoke-generating materials away from the batteries.

Always wear eye protection near the battery and ensure adequate 

ventilation during installation.

Summary of Contents for ORION 6





















































Reviews: