manualshive.com logo in svg

NorthStar NSB12-170RT, Applications Manual

Share
Download
NorthStar NSB12-170RT Applications Manual Download Page 13

11.5  Annual Maintenance

•  Repeat semi-annual checks.
•  Re-torque the intercell connector bolts to 71 in-lbs.
•  Equalization charge of 2.41vpc for 6 hours.

11.6  Bi-Annual Maintenance

The battery should be capacity tested every two years at 

the service load or at the battery rating related to service 

requirements. Ideally, this will be the same rate at which 

it was acceptance tested when originally installed. Once 

the battery is found to be at 85% of rating, it should be 

capacity tested annually. The above record taking is the 

absolute minimum to protect the warranty. This data will 

be required for any warranty claims on the batteries.

11.7 Cleaning

The  plastic  battery  containers  are  not  compatible 

with  many  commercially  available  chemicals  including 

cleaning products and insecticides. These chemicals can 

damage the battery case and cause leakage of sulfuric 

acid. If the battery needs to be cleaned, use water. Do 

not spray insecticides directly on the batteries. 

12 

Warranty Information

A  warranty  sheet  provided  by  NorthStar  needs  to  be 

filled in for each installation and returned by e-mail to 

the following address:

[email protected]

13 

Contact Information

For detailed technical specifications, please refer to the 

Product Data Sheets provided at www.northstarbattery.

com or contact one of the following:

NorthStar Americas

NorthStar Battery Company 

LLC 4000 Continental Way

Springfield, MO, 65803. 

United States of America 

[email protected]

Tel: +1 417 575 8200

Fax: +1 417 575 8250

NorthStar Europe 

SiteTel Sweden AB 

Haukadalsgatan 8 A

SE-164 40 Kista

Stockholm, Sweden 

[email protected] 

Tel: +46 8 410 102 00

Fax: +46 8 638 06 00

NorthStar Middle East. Africa 

NorthStar Battery DMCC

Office 702, Saba 1 Tower 

Jumeirah Lake Towers, Dubai 

United Arab Emirates 

[email protected]

Tel: +971 4 423 8060

Fax: +971 4 423 8061

NorthStar Asia-Pacific

NS Asia Pacific Sdn. Bhd.

B2-3A-13A Solaris Dutamas

No. 1. Jalan Dutamas 1

50480 Kuala Lumpur, Malaysia 

[email protected]

Tel: +60 3 6419 0711

NorthStar China

Northstar Group

Room 1111, International Commerce Chamber

Fuhua 3 RD Shenzhen, China

[email protected]

Tel: +86-755-23832313

Form:  SES-541-01711

Issued:  12-08-16

ECO-101191

Summary of Contents for NSB12-170RT














Reviews:

No comments

Brands by name

Popular brands

Load more brands