52
53
Reply to an all ships call
PORT OPS/VTS
N 39 27.021’
E135 12.011’
T 09:34 UTC
RCV:ALL SHIPS
URGENCY
123456789
ESC->EXIT
PORT OPS/VTS
N 39 27.021’
E135 12.011’
T 09:39 UTC
When the radio picks up an incoming all ships
call:
1. The radio beeps to alert you to the incoming
call. The type of beep depends upon the type
of call. Press any key
except
PTT
or
<ESC
to
stop the beeps now. The radio automatically
selects CH16.
At the same time, the LCD screen displays
the BUSY symbol, the type and priority of the
incoming call, the MMSID of the caller, and
invites you to press
<ESC
to exit.
If you press
<ESC
or do not respond within
three minutes, the radio returns to its previous
status.
The radio automatically selects the working
channel designated in the incoming call.
At the same time, the LCD screen displays
the BUSY symbol, the type of incoming call,
the group name and the designated channel.
After one second this LCD screen changes
and displays the group MMSID and invites
you to press
<ESC
to exit. These two screens
alternate once every second, for a maximum of
three minutes.
If you press
<ESC
or do not respond within
three minutes, the radio returns to its previous
status.
2. No acknowledgement is required. Just press
PTT
to communicate on the designated
working channel.
The details of the incoming call are stored
in the call log. If the call log is full, the oldest
entry is automatically deleted.
If the radio recognises the MMSID as one of
your buddies, it displays the buddy name in
place of the MMSID.
2. No acknowledgement is required. Just press
PTT
to communicate on the designated
working channel.
The details of the incoming call are stored
in the call log. If the call log is full, the oldest
entry is automatically deleted.
IMPORTANT!
You must have stored at
least one group MMSID
into your radio in order
to access this function.
(See
Reference Section
2 - Enter a new group
MMSID
.)
The all ships ROUTINE
category at 1W
transmission power is
available only in USA/
Canada.