NorthStar NS100 DS Quickstart Manual And Reference Manual Download Page 33

Page: 33 / 80

Com port setting

USA/INT/CAN

GPS/DATA

DSC SETUP

>RADIO SETUP

RADIO SETUP

WATCH MODE

WX ALERT

>COM PORT

CHECKSUM

ENT>ON

ESC>OFF

If you have a group of boat instruments that

communicate with each other using NMEA

protocol, you can add the radio to the group.
1. Scroll through the radio menu until

RADIO

SETUP

is displayed.

2. Move the cursor to

RADIO SETUP

and press

>ENT

Reset to factory defaults

USA/INT/CAN

GPS/DATA

DSC SETUP

>RADIO SETUP

RADIO SETUP

WX ALERT

COM PORT

>RESET

RESET RADIO

ARE YOU SURE

ENT>YES

ESC>NO

3. Move the cursor to

COM PORT

then press

>ENT.

4. Press

>ENT

again to select CHECKSUM ON

and have the radio communicate with the

other instruments through NMEA protocol.

Some older intruments may need CHECKSUM

to be set OFF, so they can access GPS data.

You can reset the radio back to the following

factory defaults:
Time offset:

00.00

Time format:

24 hour clock

Time display:

LL display:

GPS alert:

Off (USA), On (Europe)

Individual reply: Manual

LL reply:

Manual

WX alert:

Contrast:

Priority channel: CH16

Watch mode:

CH16

Your buddy list and group list are

not

deleted

when you reset the radio.

1. Scroll through the radio menu until

RADIO

SETUP

is displayed.

2. Move the cursor to

RADIO SETUP

and press

>ENT

3. Scroll through the RADIO SETUP menu until

the cursor is next to

RESET

then press

>ENT

4. The radio asks you to reconfirm that you really

want to reset to the factory defaults. Press

>ENT

to reset the radio

OR
press

<ESC

to keep all your preferences.

Summary of Contents for NS100 DS

















































































Search results

Summary of Contents for NS100 DS

Reviews:

Related manuals for NS100 DS

Brands by name

Popular brands

NorthStar NS100 DS, Quickstart Manual And Reference Manual

Search results

Summary of Contents for NS100 DS

Reviews:

Related manuals for NS100 DS

Brands by name

Popular brands