11
SAFETY FEATURES
I.) Safety Relief
The safety relief valve is a backup safety feature. If the
unloader malfunctions, the safety relief valve will open
and relieve system pressure.
WARNING: If the safety relief valve ever discharges
water, turn the engine off and do not use the
machine. See a dealer or call Customer Service at
1-800-270-0810.
II.) Thermal Protector
The thermal protector protects your pump from
overheated water. When the spray gun trigger is
released, the pump
DOES NOT
stop pumping. Water is
circulated through the unloader valve and pump. The
circulating water heats up quickly. The thermal protector
discharges water when it reaches 140°F preventing
pump damage .
Maintenance Instructions
*Refer to the Honda Engine Owner’s Manual for Engine Maintenance Instructions
Maintenance Mode
Before performing any maintenance on the pressure
washer, it must be placed in maintenance mode.
A.) Turn off engine.
B.) Turn off water supply.
C.) Bleed water from system.
D.) Shut off fuel valve.
E.) Unplug spark plug wire from spark plug.
Maintenance Schedule
What to Check
When To Check
What to Do
Inlet Filter
Each Use
Clean
Tires
Each Use
Check Pressure
Hoses
Each Use
Check for Wear
Bolts
Each Use
Check for Loose
Bolts
Checking the Tire Air Pressure
A.) Remove air fill cap.
B.) Fill tire to 20psi (1.4bar).
C.) Replace air fill cap.
Air Fill Cap
00425
Thermal
Protector
00480
Safety
Relief
Low Water
Shutdown
Air Fill Stem