manualshive.com logo in svg

NorthStar EXPLORER 725EU, Operation And Installation Manual

Share
Download
NorthStar EXPLORER 725EU Operation And Installation Manual Download Page 25

25

Northstar 

Explorer VHF Series: 721/725

 Operation and Installation Manual

NMEA 
CHECKSUM
  >  ON
      OFF

RADIO SETUP
      WATCH MODE
      WX ALERT
  >  COM PORT

GPS SOURCE
NMEA
  >  ON
      OFF

GPS SOURCE
  >  NMEA
      NAVBUS

COM PORT
      NMEA
  >  GPS SOURCE
      BARO & TEMP

3-8-2 NMEA GPS data source (GPS SOURCE)

1.  Select RADIO SETUP, then COM PORT.
2.  Select GPS source, then select NMEA.
3.  The cursor is at ON.  Press ENT or push the rotary knob to confirm the 

setting and show the CHECKSUM option.

4.  CHECKSUM ON is the usual setting. The cursor is at ON. Press ENT or push 

the rotary knob to confirm the setting and return to the menu.

3-8-3 NAVBUS GPS data source (GPS SOURCE)

RADIO SETUP
      WATCH MODE
      WX ALERT
  >  COM PORT

GPS SOURCE
NAVBUS
  >  ON
      OFF

GPS SOURCE
      NMEA
  >  NAVBUS

COM PORT
      NMEA
  >  GPS SOURCE
      BARO & TEMP

1.  Select RADIO SETUP, then COM PORT.
2.  Select GPS source, then select NAVBUS.
3.  The cursor is at ON. Press ENT or push the rotary knob to confirm the setting and return to the menu.

3-8-4 Use the 721/725  as barometric pressure and temperature data source (BARO & TEMP)

RADIO SETUP
      WATCH MODE
      WX ALERT
  >  COM PORT

BARO & TEMP
  >  ON
      OFF

COM PORT
      NMEA
      GPS SOURCE
  >  BARO & TEMP

1.  Select RADIO SETUP, then COM PORT.
2.  Select BARO & TEMP.
3.  The cursor is at ON. Select ON to have the radio provide the barometric and temperature data to other 

instruments connected. Select OFF to have another instrument to act as the source of this data.

3-9 Barometric Displays (BARO SENSOR)

A barometric sensor in the microphone measures air pressure changes, enabling the radio to provide 
three useful aids towards weather prediction and fishing conditions, particularly when you’re close to 
large land masses. (See the information on the Happy Fish icon in Section 1-5.) The radio can show:

a weather icon to indicate five different conditions (SUNNY, PARTLY CLOUDY, CLOUDY, RAINY, 

• 

SNOW). The local air pressure trends combined with the local temperature determines which 
weather icon is displayed.
a digital readout of air pressure (in mb or in/Hg).

• 

a graphical display of barometric pressure changes over the past consecutive 24 hours. 

• 

Summary of Contents for EXPLORER 725EU

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands