NorthStar EXPLORER 725EU Operation And Installation Manual Download | Manualshive

Page: 24 / 64

background image

24

Northstar

Explorer VHF Series: 721/725

Operation and Installation Manual

Northstar

Explorer VHF Series: 721/725

Operation and Installation Manual

3-6 Set the Priority Channel (WATCH MODE)

If you have the 721/725 EU, watch mode is similar to a dual watch, scanning between the priority channel
and the working channel. CH16 is the priority channel.
If you have the 721/725 US and are operating on USA or Canadian channel banks, you can set the priority
channel to cover both CH16 and CH09 as well as the working channel, as follows:

1. Select RADIO SETUP, then WATCH MODE.
2. Select ONLY 16CH for dual watch mode, or

16CH+9CH for tri watch mode.

3-7 Weather Alert (WX ALERT)

(US only)

The NOAA provides several weather forecast channels on USA and Canadian channel banks. If severe weather
such as storms or hurricanes are forecast, the NOAA broadcasts a weather alert on 1050 Hz. You can set up
the radio to pick up weather alerts, as follows:

1. Select RADIO SETUP, then WX ALERT.
2. Select ON then press ENT or push the rotary

knob to confirm the setting and return to the
menu. (If you select OFF, WX channel will not
be watched during scanning.)

3. When a weather alert is broadcast, the alarm

will sound. Press any key to hear the weather
alert voice message.

3-8 NMEA or NAVBUS protocol (COM PORT)

(721 / 725 only)

You can add the radio to a group of instruments using NMEA or NAVBUS protocol.
NAVBUS is automatically activated when present, so that data such as barometric pressure and history,
temperature, DSC polling positions and distress data are available to any other Northstar instruments using
NAVBUS. However, the barometric and temperature readings from the radio can be turned OFF if you prefer
to use the readings from a different instrument.
Select your GPS data source to come from either NMEA or NAVBUS as follows:

3-8-1 NMEA CHECKSUM

RADIO SETUP
      WATCH MODE
      WX ALERT
  >  COM PORT

NMEA
    CHECKSUM
  >  ON
      OFF

COM PORT
  > NMEA
      GPS SOURCE
       BARO & TEMP

1.  Select RADIO SETUP, then COM PORT.
2.  Select NMEA, then press ENT or push the rotary knob to show the CHECKSUM option.
3.  CHECKSUM on is the usual setting. The cursor is at ON. Press ENT or push the rotary knob to confirm the

setting and return to the menu.

RADIO SETUP
      INT SPEAKER
      WATCH MODE
  >  WX ALERT

WX ALERT
    ON
>  OFF

RADIO SETUP
      KEY BEEP
      INT SPEAKER
  >  WATCH MODE

WATCH MODE
> ONLY 16CH
16CH+9CH

«
...
22
23
24
25
26
...
»

Summary of Contents for EXPLORER 725EU

































































Reviews:

No comments

Related manuals for EXPLORER 725EU

Brand: B&G Pages: 29

Brand: Grundig Pages: 75

Marine speedometer Operation

Brand: Honda Pages: 12

Brand: Philco Pages: 7

Brand: Magnasonic Pages: 20

airMAX Bullet Titanium BM2-Ti

Brand: Ubiquiti Pages: 24

Brand: Hytera Pages: 24

Brand: AudioSonic Pages: 44

Brand: Seastar Solutions Pages: 2

NS-C2000 - AM/FM Clock Radio

Brand: Insignia Pages: 50

Brand: Uniden Pages: 24

Brand: Denver Pages: 14

Brand: Uniden Pages: 32

Brand: Sanyo Pages: 3

Brand: Sanyo Pages: 3

Brand: Sanyo Pages: 4

Brand: Sanyo Pages: 8

R227 - Network Audio Player

Brand: Sanyo Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands