manualshive.com logo in svg

NorthStar Explorer 660, Installation And Operation Manual

Share
Download
NorthStar Explorer 660 Installation And Operation Manual Download Page 20

Northstar

 Explorer 660 

Installation and Operation Manual

20

3-3 Distance and bearing calculator

The distance and bearing calculator can plot a 
course of one or several legs and to show the 
bearing and length of each leg, as well as the 
total distance along the course. The completed 
course can be converted into a route.

To use the distance and bearing calculator:

1 Press 

ESC

 until the chart display is displayed. 

Press 

MENU

 and select 

Distance

.

2 

Move the cursor to the start of the first leg. It 
does not matter if this point is a waypoint or 
not. Press 

ENTER

.

3 

To add a leg to the course, move the cursor 
to the end of the leg. It does not matter if this 
point is a waypoint or not. The display shows 
the bearing and length of the leg, as well 
as the total distance along the course. Press 

ENTER

.

3-4 GOTO: Navigating to a point or along a route

The GOTO/AUTO key is a shortcut to start 
navigating to a point on the chart, to a waypoint 
or along a route.

Starting to navigate

Navigating to a point on the chart

1 Press 

ESC

 until the chart display is displayed.

2 

Move the cursor to the destination point.

3 Press 

GOTO/AUTO

 and select 

Goto cursor

.

Navigating to a waypoint

See section 5-3-1.

Navigating along a route

See section 6-3-1.

4 

To remove the last leg from the course, press 

MENU

 and select 

Remove

.

5 

Repeat the above two steps to enter the 
whole course.

6 

To save the new course as a route, press 

MENU

 and select 

Save

. This also saves any 

new points on the course as new waypoints, 
with default names. If necessary, edit the 
route later (see section 6-2-2) and edit any 
new waypoints later (see section 5-2-3).

7 Finally, 

press 

ESC

 to return to the 

chart display.

Note: 

See section 15-7 for Log functions.

Cancelling navigation

Cancelling navigating to a point on the chart 
or to a waypoint

1 Press 

ESC

 until the chart display is displayed. 

2 Press 

GOTO/AUTO

 and select 

Cancel goto

.

Cancelling navigating along a route

See section 6-3-3.

!

WARNING

Make sure the course does not pass over land 
or dangerous waters.

The Explorer 660 navigates to the destination as 
described in section 3-1.

Summary of Contents for Explorer 660













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands