OPEN
2.2 A
SSEMBLING THE
I
NDOOR
C
ABINET
S
MALL AND
I
NDOOR
C
ABINET
M
EDIUM
Note
: It is important to initially, not tighten the screws.
1. Put one of the two side walls on the floor, see figure 1 below.
Front
Top
Bottom
Figure 1 Put the side wall on the floor
2. Align the edges of the shelves into the holes of the side wall and attach them to
the front side using M6x20 screws, see figure 3 below.
Note:
Do not tighten the screws at this moment.
Note
: Make sure the shelf
’s back side is facing the floor. See figure 2 below.
Document Number:
INS-0038
Revision:
A
Prepared by:
Mikael Lindevall
Date:
2012-04-26
Approved by:
Ulf Krohn
Status:
RELEASED
Page 3
