NorthStar 961X, Installation Manual

Page: 65 / 86

SECTION THREE - Interfacing
961 INSTALLATION MANUAL Revision A Page 55
Aux port format Outputting DGPS corrections to another source
SC-104 OUT
outputs differential corrections from your 961XD’s internal
differential receiver to an external device that accepts the standard
SC-104 data stream. When using the
SC-104 OUT
setting, be sure that the
BAUD
setting also matches the baud rate requirements of the receiving
device.
Diagnostics
The aux port’s
DIAG
option is for factory diagnosis of 961 operating
parameters. Do not turn this function on.
Port off
Use the
OFF
setting when the aux port’s input or output functions aren’t
needed.
Aux port baud
rate
The aux port’s baud rate must match the external device’s baud rate; refer
to the external device’s instructions for the correct baud rate setting, then
follow the instructions on the previous page for changing an aux port set-
ting.
Setting PPNM
To access the pulses per nautical minute (PPNM) options:
1. Press the
STAR
key to access the
SERVICE MENU
screen.
2. Press the
PORT SETUP
key, then press the
PPNM
key.
3. The 961 displays the
PPNM OUTPUT SETUP
screen with options for
number of pulses, pulse-time minimum, and pulse-separation mini-
mum.
Figure 28: PPNM output setup screen