Installation & Quick Setup Guide
29
29
Note:
You can enable the Guarding Vision service for the device during
activation. Refer to Chapter 6.1 for detailed information.
4.
Click
Activate
to start activation.
You can check whether the activation is completed on the popup
window. If activation failed, please make sure that the password
meets the requirement and try again.
3.3
Modifying the IP Address
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC.
Use the SADP software or client software to search and change the
IP address of the device. We take modifying the IP Address via SADP
software as an example to introduce the IP address modification.
For IP address modification via client software, refer to the user
manual of client software.
Steps:
1.
Run the SADP software.
2.
Select an active device.
Note:
Please refer to Section 3.2 to activate the camera if the camera is
inactive.