Northern HDPTZ33X, User Manual

Page: 42 / 44

3 OSD Setting
Infrared High Dome User Manual
Issue V1.0 (2020-09-25) 40
Figure 3-48 ALARMS SETUP interface

INPUT CHANNEL: 1, the alarm device will be connected to the alarm cable.

ALARM ACTION: Press SET or RIGHT button to adjust, the icon & shows , press UP or DOWN button to
choose PRE, SCAN, PAT or TOUR.. Press SET or RIGHT button again to end setting.

LINK A/O: OFF, A01.

A/O CONTACT: N/C, N/O

RESET DELAY: Press SET or RIGHT button to adjust, the icon & shows , press UP or DOWN button to set the
delay time.

RESUME: Press SET or RIGHT button to adjust, the icon & shows , press UP or DOWN button to set OFF or ON.

ALARM SCHEDULE: set the alarm schedule, ARM STATE, ARM TIME, DISARM TIM, as shown in Figure 3-49.
Press SET or RIGHT button to adjust the icon & shows , press UP or DOWN button set value, press RIGHT or
LEFT to switch hour or minute.
Figure 3-49 ALARM SCHEDULE