Northern HDPTZ33X User Manual Download Page 9

                                                                                                   
Infrared Speed Dome User Manual 

 

 

Issue V1.0 (202009-25) 

 

The user can control "Wide/Tele" to adjust zoom far and near of the image by keyboard controller to 
obtain panoramic image or close view that you need. The speed dome support digital zoom and optical 
zoom. 

 

Focus control 

System defaults to Auto focus. When the lens changes, camera will auto-adjust focus according to the 

center of the image to get a usable image; user also can manually focus to get desire image by operating   

keyboard "FAR/NEAR". When operating keyboard joystick, camera resumes to auto focus.   

  The camera cannot auto focus in the following status: 

Target is not the Centre of the image. 

Observing both near and far targets at the same time, cannot be clear at the same time. 

Target is a strong light object, such as spotlight etc. 

Target moves too fast. 

Target has no edges, such as wall. 

Target is too dark or vague. 

Target image is too small. 

 

 

Iris control 

System defaults Auto Iris. Camera can rapidly adjust size of Iris, through the automatically induct the 
changing of environment ray, and thus make the brightness of different image stable.   

User may adjust iris by controlling keyboard "OPEN/CLOSE" to get required brightness that you need. 
User also can resume auto Iris by keyboard. When controlling the Iris manually, the dome locks current 
position you manually controlled; when operating keyboard, the dome resume auto Iris. 

 

Auto back light compensation 

Camera sub-area can carry out auto back light compensation. Under a strong back lighting conditions, 
camera will auto compensate light for the darker object and adjust daylight to the bright background. 
Auto white balance 

Camera can automatically adjust white balance in accordance with the alteration of background 
brightness to reach a true color. 

 

1.3.2 Monitor Function 

 

Set and Call Preset 

Preset function where dome stores current pan/tilt angle, zoom and other position parameters into 
memory. When necessary dome recalls these parameters and adjusts camera to that position.   

User can store and recall presets easily and promptly by using keyboard controlling. The dome can   

store up to 128 presets. 

 

Summary of Contents for HDPTZ33X













































Reviews: