Assembly Instructions
36
Step 10
Attach the Cylinder Hoses to the Control
Valve.
Use Teflon Tape on Hose Threads.
Attach the Long Cylinder Hose to the
Control Valve Port marked “B”.
Attach the Short Cylinder Hose to the
Control Valve Port marked “A”.
* Pump Hose removed for Clarity
Step 11
Route the Cylinder Hoses through the Hose
Guide and then through the opening
between the Beam Assembly and Hydraulic
Tank Assembly.
Install the Zip Tie around the pump and
cylinder hoses.
Long hose
Short hose
Control valve
A
B
Cylinder
hoses
Zip tie
Hose guide
Beam
assembly
WARNING
All Hoses should be routed and secured
outside of the beam slide zone.
Note: Injury can occur if beam slide comes
into contact with any hose.
Beam Slide
Zone
Hydraulic Hoses
