Northern Stoker 30-30, Owner'S Manual, Page: 15 / 28

13
The Electronic Control System is exceptionally easy to operate. Essentially it operates and performs just
like a thermostat. Please ensure that the furnace is completely filled with fluids and all electrical
components are plugged in before proceeding.
A. When you are going to START a fire for the FIRST TIME… the Electronic Control
System is OFF now.
1 Turn ON Electronic Control System. Turn the “SYSTEM”
selector switch (D) from OFF to ON, on the Electronic Control
System. Press the “ START ” button (C) on Electronic Control
System.
Turn the “ SYSTEM ” selector
switch (D) to ON . Press the
“ START ” button (C) on Electronic
Control System.
2 Turn OFF the combustion chamber blower fan for the combustion
chamber BEFORE you open the combustion chamber door.
Toggle switch is located on the upper right side of structure.
Flip combustion chamber blower fan
toggle switch OFF .
3 Set the target temperature that you want the furnace to operate at by
pressing the UP arrow and DOWN arrow buttons (O) on the
“CONTROLLER” (H). The range of adjustable temperature is
150 ºF to 185 ºF (65.6 ºC to 85 ºC). Simply press up or down to the
desired temperature shown at (M). Now the furnace is set and will
automatically take over.
Now light your fire in the combustion chamber.
Press the UP and DOWN arrow
buttons (O) on the
“CONTROLLER” (H). The set
temperature will be shown at (M).
4 Once the fire is lit, close the combustion chamber loading door and
turn ON the blower fan. Toggle switch located on the upper right
side of the furnace.
Flip combustion chamber blower fan
toggle switch ON.
B.
Adjust the temperature while the furnace is running… Electronic Control System is
ON now.
1 Set the target temperature that you want the furnace to operate at by
pressing the UP arrow and DOWN arrow buttons (O) on the
“CONTROLLER” (H). The range of adjustable temperature is
150 ºF to 185 ºF (65.6 ºC to 85 ºC). Simply press up or down to the
desired temperature shown at (M). Now the furnace is set and will
automatically take over.
Press the UP and DOWN arrow
buttons (O) on the
“CONTROLLER” (H). The set
temperature will be shown at (M).
Electronic Control
System