Northern Lights Lugger L984, Operator'S Manual

Page: 53 / 100

P984 09/05
5 - 3
GROUP 5 – ELECTRICAL SYSTEM
Engine Electrical 12 Volt & 24 Volt Standard Ground Engine Electrical 12 Volt & 24 Volt Standard Ground
KEY PART NUMBER QTY DESCRIPTION SERIAL NUMBER KEY PART NUMBER QTY DESCRIPTION SERIAL NUMBER
•• 22-70083 1 Dual Station Relay Board, 12 Volt* -
(includes keys #5 - #11 – see parts detail, formerly #22-70007)
•• 22-70084 1 Dual Station Relay Board, 24 Volt* -
(includes keys #5 - #11 – see parts detail, formerly #22-70018)
1 22-40233 1 Oil Pressure Switch -
2 22-41016 ** Oil Pressure Sender - Single Station 0-80 PSI -
22-71016 ** Oil Pressure Sender - Dual Station 0-80 PSI -
22-44871 ** Oil Pressure Sender - Single Station 0-150 PSI -
22-44872 ** Oil Pressure Sender - Dual Station 0-150 PSI -
3 22-41025 1 Temperature Switch -
4 22-42055 1 Temperature Sender - Single Station -
22-71026 1 Temperature Sender - Dual Station -
21-51099 1 Bushing 3/8 NPT x 1/4 NPT
(use with dual station sender)
-
5 22-40391 3 Relay Base *** -
22-40393 3 Clip -
6 22-42047 3 Relay, 12 Volt -
22-40085 3 Relay, 24 Volt -
7 22-40018 1 Circuit Breaker, 15 Amp
(units with relay board assemblies)
-
22-42043 1 Circuit Breaker, 15 Amp
(units with PX-K generators)
-
8 22-41060 2 Diode -
9 12-00015 3 Machine Screw, #10 - 32 x 3/8" -
10 15-00032 3 Flat Washer, #10 -
11 14-00006 3 Hex Nut, Nylock #10-32 -
12 21-00139 1 Female Adapter 1/8 BSPT x 1/8 NPT -
13 21-05400 1 Street Tee 1/8 NPT -
14 21-00004 1 Street Elbow 45° 1/8 NPT -
15 00-41015 1 Universal Bushing -
16 22-45409 1 Wire Harness
(units with 224, 360, and 361 frame generators)
-
22-45407 1 Wire Harness
(units with PX-K generators require #5 base & clip if
-
equipped with early relay base without clip)
17 22-40928 ** Harness Extension 10 ft. -
22-40930 1 Harness Extension 20 ft.
(standard equipment)
-
22-40931 ** Harness Extension 40 ft. -
22-40932 1 Y-Harness
(for multiple panels)
-
18 27060-78305-71 1 Alternator, 12 Volt 40 Amp
(see mounting & parts detail)
-
22-40278 1 Alternator, 24 Volt 40 Amp -
19 22-42054 1 Stop Solenoid 12 Volt
(see mounting detail)
-
22-40007 1 Stop Solenoid 24 Volt
(see mounting detail)
-
20 28100-78502-71 1 Starter 12 Volt
(see parts detail)
-
28100-78501-71 1 Starter 24 Volt -
*Note 1: Relay board assemblies used on units with 224, 360, and
*NOTE 361 frame generators.
**As required
***Note 2: Relay base without retainer clip replaced by kit 22-40395
(includes base, clip, & terminals). Use if not replacing wire
harness.
Generator Set Applications
}
}
Current
Production
Early Production