5
1
2
6
28
22
29
7
8
17
27
H
H
M
L
TYPICAL UNLESS
NOTED
ONLY WHERE
SHOWN
I
H
H
F
AC
AC
AC
AC
AC
1. Attach the
Rear Upright (2)
to the
Base(1)
.
2. Attach the
Main Upright(6)
to the
Base(1)
using the
Upright to Base Brackets(7)
.
3.
Install the
Top Brackets(17)
& the
Upper
Guide Rod Support(8)
to the
Main Upright(6)
& the
Rear Upright(2)
. Do not tighten the three
(3) bolts
(I)
holding the
Upper Guide Rod
Support(8)
until the Weight Stack has been
installed.
4. Attach the
Knee Roller Support(28)
to the
Main Upright(6)
.
5. Remove the 5/8" Locknut from the shoulder bolt in the
Base(1)
, position the
Low Row Pulley Bracket(22)
over the shoulder bolt and replace the Locknut.
Do not over tighten the Locknut
.
6. Attach the
Low Row Calf Raise Attachment(29)
to the
Base(1)
.
NOTE: THE LOW ROW CALF RAISE ATTACHMENT CAN BE CONNECTED TO BASE IN THIS STEP
OR CAN BE CONNECTED AT A LATER TIME, TO ALLOW FOR ADDITIONAL WORKING SPACE.
7. Insert
plastic caps(AC & AD)
where shown.
AD
