uampl.:
Bending
L.tt
.
...
for Signs (continued)
STOCK REQUIRED
alit-in. stock; 2-in. max. width
One 10-in. blank-
BEND SEQUENCE
Setup
3
2
1,'Il" t-
2'12'
-1"1."1
Make chalk marks on the blank as shown on the "Bend Sequence."
B.nd No.1
Insert the blank into the Benderto the
#1
chalk mark (as in A), and bend
it
to
45°.
Recheck the angle before you go on to the second bend.
Chalk-mark the ring, or set a stop, for ease of repeating the
45°
bend.
Bend No.2
Slide the stock to the
#2
chalk
mark
(as in
B),
and bend
to
45°.
Recheck
the angle.
Bend No.3
Slide the stock to the
#3
chalk mark (as in
C),
and bend
to
45°.
Recheck the angle.
To remOVe the-part from the Bender, remove the pin that holds
the sharp-angle-bend attachment.
finishing
Grind and sand all sharp corners.
B
o
A
o
c
o
27
