Page 6 of 10
WARNING:
1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger,
(2) battery, and (3) product using battery.
2. Use only the charger that is included with your rotary tool and battery. Do not substitute another
charger.
3. Do not dissemble the charger
4. Do not use charger if it is exposed to wet environments or immersed in liquid.
5. Heat is generated when the battery is being charged. Ensure the charger is placed on a flat,
nonflammable surface away from flammable materials. Provide for at least 5 inches of clearance
around battery and charger to allow for proper circulation.
NOTE:
The charger will not automatically turn off when battery is charged. The red charging light will
remain on until the charger is disconnected from the electrical wall outlet.
CHARGING ONE BATTERY
1. Plug charger stand into 120V AC adaptor.
2. Plug adaptor into wall outlet.
3. Insert battery into charger stand. Red LED light will come on indicating charge mode.
4. Battery will be fully charged in approximately 3 hours.
CAUTION:
Make sure the trigger on the cordless rotary tool is off before removing the battery from the
rotary tool.
OPERATING INSTRUCTIONS
Operating Speeds
