WARRANTY
May 06, 2020
Page 9
User Manual No: OM-101A EN
SECTION 2
–
WARRANTY
The MIG/MAG Manual Welding Torch is
safe and reliable in operation when han-
dled, installed and maintained by suita-
bly Trained and Qualified Tradesper-
son.
JINAN NORTH WELDING TOOLS products are meticu-
lously checked during and at completion of manufacture.
JINAN NORTH WELDING TOOLS guarantees that each
product is free from material defects and workmanship at
the time of dispatch and functions according to its intended
use.
JINAN NORTH WELDING TOOLS provides warranty on ma-
terial defects and workmanship according to national or
state legal requirements.
Contact Tips, Nozzles, and Liners (consumables) are ex-
empt from this warranty.
The warranty does not cover any damages or functional de-
fects resulting from:
•
Overloading, abusing, or diverting from intended use
of the product.
•
Collisions or accidents.
•
Non-compliance with instructions stated in this docu-
ment.
•
Improper installation or assembly.
•
Insufficient maintenance.
•
Modifying the product from its original state.
•
Chemical influences.
•
Normal wear and tear.
JINAN NORTH WELDING TOOLS assumes no liability other
than for replacement or repair of faulty parts.
JINAN NORTH WELDING TOOLS makes no other warranty
of any kind, expressed or implied, including, but not limited
to the warranties of merchantability, or fitness for any pur-
pose. JINAN NORTH WELDING TOOLS shall not be liable
under any circumstances to Buyer, or to any person who
shall purchase from Buyer, for damages of any kind, in-
cluding, but not limited to any direct, indirect incidental or
consequential damages or loss of
production or loss of profits resulting from any cause what-
soever, including, but not limited to any delay, act, error or
omission of JINAN NORTH WELDING TOOLS.
Genuine JINAN NORTH WELDING TOOLS parts must be
used for safety and performance reasons or the warranty
becomes invalid. Warranty shall not apply if accident,
abuse, or misuse damages of a product, or if a product is
modified in any way except by authorized JINAN NORTH
WELDING TOOLS personnel.
2.01
Conditions of Intended Use
•
This product is intended for industrial and commercial
use and must only be utilized by suitably trained per-
sonnel. JINAN NORTH WELDING TOOLS is not liable
for any damage or accidents resulting from improper
usage.
•
The instructions for installation, operation and mainte-
nance described in this document must be followed.
•
The MIG/MAG Manual Welding Torch must only be in-
stalled, operated, and serviced by suitably Trained and
Qualified Tradesperson. The installation, operation, and
maintenance regulations detailed in this manual are to
be followed.
•
The MIG/MAG Manual Welding Torch must solely be
used for the intended purpose by the user within the
Torches technical specifications and with an automated
welding system. The type of Torch must be selected to
suit the welding task.
•
The MIG/MAG Manual Welding Torch was designed for
use as a complete system. The incorporation of com-
ponents from other manufacturers into the system is
not permissible.
•
The product must be kept dry and protected from hu-
midity when transported, stored or used.
•
The system is designed for environmental temperature
range from 5 °C to 40 °C (41 °F to 104 °F). In case
these limits are exceeded, specific action is needed.
