3.1 TURNING ON THE APPLIANCE .....................................................................................................
After making sure the appliance has been correctly connected to electricity, you can start using it.
Motor switch
•
Position 1 : Start spit’
s rotation.
•
Position 0 : Stop spit’
s rotation.
Four position knobs (0,1,2,3)
Depending on the desire heating position select the respective knob and adjust. Each knob controls
the operation of two heating elements.
•
Position 1 : Both operate at low rate.
•
Position 2 : One operates at high rate.
•
Position 3 : Both operate at high rate.
•
Position 0 : Both are out of operation.
The indicating lamp is on for positions 1, 2 and 3.
3.2 PREPARING THE SPIT...................................................................................................................
•
Prepare the spit by setting the round meat base into place.
•
Place the meat on the spit with the herbs and spices you have already prepared.
•
Secure the spit on the lower base by placing the arm in the appropriate support position.
•
Secure the top end of the spit in the appropriate position by locking the safety key.
Now the Gyros-grill appliance is ready to operate. All you have to do is set the desired heating
element-to-spit distance (about 10 cm) and start the rotation motor by pressing switch.
3.3 CLEANING AND MAINTENANCE....................................................................................................
∗
Turn off the heating elements before any cleaning or maintenance procedures. Let the appliance
cool and make sure it has been unplugged from the main supply.
∗
At the end of the working day, remove the arm and clean it thoroughly. Empty and clean fat
collecting drawer as well as the peat scoop.
∗
Clean with a wet cloth the reflecting surfaces on the sides of the appliance and the base of the
spit.
∗
Never use running water to clean the Gyros-grill appliance.
∗
Never use running water to clean the appliance.
