2.1 INSTALLATION OF THE APPLIANCE............................................................................................
After making sure the appliance is intact, place it in position so that it is stable and there is adequate
operating space around it.
Make sure that all parts are at hand, i.e.:
•
Gyros-grill ND-6 or ND-8
•
Spit
•
Round tray to support the meat.
•
Fat collecting drawer
•
Meat scoop.
•
Instruction manual.
Attention !
To avoid accidents, keep all packing materials (cardboard, plastic bags, metal items, etc)
away from children.
Important !
Install the gyros-grill on a flat non-flammable surface, away from flammable walls.
2.2 ELECTRICAL CONNECTION.........................................................................................................
Remove the rear cover of the appliance.
•
Enter a suitable supply cord through the gland.
•
Depending on the available power supply connect the cables.
ND-6 (Two phases power supply)
ND-8 ( hree phases power supply)
Connect the phases to L1, L2.
Connect the earth neutral to 1 or 2.
Connect the earth.
Connect the phases to L1, L2 and L3.
Connect the neutral to 1 or 2.
Connect the earth.
. Single phase power supply
ND-6
ND-8
With the provided bridges and short circuit L1,
L2.
Connect the phase to L1 or L2, the neutral to
1 or 2 and earth to earth terminal.
With the provided bridges and short circuit L1,
L2 and L3.
Connect the phase to L1 or L2 or L3, the neutral
to 1 or 2 and the earth to earth terminal.
•
Connect P.A. terminal to water piping using a 10 mm² wire.
IT IS STRONGLY RECOMMENDED TO USE A QUALIFIED ELECTRICIAN FOR ALL
ELECTRICAL CONNECTIONS.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ACCIDENTS AND
DAMAGE CAUSED TO PERSONS, ANIMALS OR PROPERTY DUE TO NONCOMPLIANCE WITH
THESE INSTRUCTIONS.
