2.1 INSTALLATION OF THE APPLIANCE............................................................................................
After making sure the appliance is intact, place it in position so that it is stable and there is adequate
operating space around it.
Make sure that all parts are at hand, i.e.:
•
Gyros-grill – Spit - Round tray to support the meat. - Fat collecting drawer - Meat scoop – Manual
Attention !
To avoid accidents, keep all packing materials (cardboard, plastic bags, metal items, etc)
away from children.
Important !
Install the gyros-grill on a flat non-flammable surface, away from flammable walls.
2.2 ELECTRICAL CONNECTION.........................................................................................................
Remove the back cover of the appliance.
•
Enter a suitable supply cord through the gland.
•
Depending on the available power supply connect the cables.
a. Single phase power supply
MKDKE6,MKDKE8, DKE6, DKE8
. Remove the provided bridges and
short circuit L1, L2 and L3.
Connect the phase to L1 or L2 or L3,
the neutral to Ν1 or Ν2 and the earth
to earth terminal.
b. Three Phase power Supply
MKDKE6,MKDKE8, DKE6, DKE8
Connect the phases to L1, L2 and L3.
Connect the neutral to Ν1 or Ν2.
Connect the earth.
•
Connect P.A. terminal to water piping using a 10 mm² wire.
IT IS STRONGLY RECOMMENDED TO USE A QUALIFIED ELECTRICIAN FOR ALL
ELECTRICAL CONNECTIONS.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ACCIDENTS AND
DAMAGE CAUSED TO PERSONS, ANIMALS OR PROPERTY DUE TO NONCOMPLIANCE WITH
THESE INSTRUCTIONS.
