3
1
4
2
4
1 2
4C
4E
4F
4G
4D
5A
5B
4A
4B
Step 4
t
Tighten both of the bottom tension knobs 4A by turning them clockwise at the same time 4B.
t
Tighten both of the upper tension knobs 4C by turning them clockwise at the same time, so the gap
between
t6TFUIFXSFODIQSPWJEFEUPFBTFUVSOJOHUIFUFOTJPOLOPCT
Figure 4E, 4F.
1.
Rotate the locking handle to the vertical position.
2.
Depress the release button as shown.
3.
Lift the door up until it swings freely.
4.
Swing the door open in desired direction.
Operation
1.
Simply release the gate and allow it to swing closed (unless the Stay-Open feature is used).
2.
To activate the triple latch, rotate the locking handle to the horizontal position, as shown in
fi
gure 5B.
Note: Verify proper gate installation by partially opening and releasing it several times.
The door will swing closed and double-latch automatically. Regularly check tension knobs
Opening the gate locking system (see Figure 5A):
Closing and latching the gate (see Figure 5B):
Note:
When tightening, the distance between the 4 tension bolts shoul
Page 4
1.5~2mm
and rubber pads to make sure the gate is securely in place.
Summary of Contents for 4916
Page 1: ......
