Installation
2A
2
2C
B
3B
3A
t
Measure width of the opening.
1A, 1B, 1C to determine the correct installation.
Step 1
Step 2
Step 3
t
Secure the gate, fasten the mounting cups to the wall by aligning them with the bolts with rubber pads.
Use double coated tapes or screw provided as shown in 3B.
IMPORTANT: Never install this gate without mounting cups!
t
Insert extension pins into hole on the outside of the gate frame. Note: The long ends of the pins go into the
gate frame, short ends go into the extension 2B.
t
Slip extensions over the pins.
t
Slide both the upper and lower tension bolts with rubber pads into the holes on the outside of the extension.
Page 3
28.25 to 30.75 ”
(72 to 78 cm)
31.75 to 34.25 ”
(81 to 87 cm)
With 1 extension
35.75 to 38.25 ”
(91 to 97 cm)
With 2 extensions
Summary of Contents for 4916
Page 1: ......
