North Star 2287182 Owner'S Manual Download Page 6

Summary of Important Information 

 

 

EXERCISE EXTRA CAUTION when spraying near areas accessible to children and pets

 

CLEAN up spills immediately

 per instructions on the chemical label. 

 

TURN OFF power to sprayer, and RELIEVE system pressure 

before leaving sprayer unattended. 

 

SEE Troubleshooting section of this manual before attempting any repairs

.  Wear personal 

protective equipment and follow safety instructions.

 

 

After Spraying 

 

CLEAN immediately after use

 according to the directions provided in this manual. 

 

DECONTAMINATE yourself after you are

 done spraying and have cleaned the spraying system.  

Wash all exposed areas of the body with soap and water, and remove and launder clothing.  

 

DISPOSE OF or STORE remaining chemicals in secure storage with correctly marked 
container

.

 

 

Chemical accident procedures 

 

Immediate response is necessary in the event of sprayer leaks, bodily chemical contact, poisoning, or 
spills.  See instructions below: 

 

Sprayer leak 

If the sprayer develops a leak, 

immediately stop spraying

.  Turn off power to 

the sprayer and follow directions below, as applicable.  

Bodily 
chemical 
contact 

Personal contamination can occur when chemicals splash, spill, or spray 
directly onto a person.   

 

1.  Immediately follow First Aid instructions on chemical label. 

 

General procedures can include: 
a) Eyes – immediately flush with water. 
b) Skin – wash all contaminated skin surfaces with soap and water. 
c) Clothing – remove contaminated clothing.  Dispose of heavily 

contaminated clothing per chemical label instructions.   

 

2. Seek medical advice if instructed on the label or the victim experiences 

symptoms of harmful effects.  Bring the chemical label for reference. 

Poisoning by 
ingestion or 
inhalation 

In case of poisoning from ingestion or inhalation

 

If the victim has collapsed or is not breathing, call 911

.  Otherwise: 

 

1. If you are the victim, immediately seek assistance from nearby personnel 

because you may become incapacitated. 

2. Immediately follow first aid instructions on chemical label. 
3. Call a poison control center for further advice.  

In the U.S., call 1-800-222-

1222.  

Have the chemical label available for reference. 

 

Chemical 
spills 

Chemical spills must be quickly contained and properly cleaned up.   

 

Refer to the chemical label for any specific clean-up instructions. 

 

General procedures include: 
1.  

Controlling 

the spill by stopping the source of the spill.  

2.  

Containing 

the spill so that it does not spread and get into water sources. 

3.  

Cleaning up 

the spill immediately. 

4.  

Seeking additional advice

 from: 

Chemical manufacturer

.  See chemical label for contact information. 

State pesticide regulatory agency

.  In the U.S., call the National Pesticide 

Info. Ctr. at 800-858-7378 for assistance in contacting your state’s agency.  

 

Summary of Contents for 2287182































Reviews: