North Star 2287182 Owner'S Manual Download Page 5

Summary of Important Information 

 

 

WARNING 

 

Read and understand 

this owner’s manual

 completely before using the conversion kit.  Read 

each 

chemical label’s instructions

 before handling the chemical.   

 

Improper use of the conversion kit or handling of chemicals could result in serious injury 
or illness for the operator

 

or nearby persons/animals, or cause damage to the environment.

 

 

 

LISTED BELOW is a summary of safety information of particular importance.  See individual 
sections of this owner’s manual for more details. 

 

------------------------------------ DURING ASSEMBLY------------------------------- 

 

 

CHECK and TEST completed assembly 

as directed in this manual.

  

Serious injury could result from 

chemical leaks if sprayer is improperly assembled. 

 

DO NOT MODIFY sprayer design.  

  

 

------------------------------------DURING OPERATION------------------------------ 

 

General Chemical Safety 

 

READ and FOLLOW each chemical label’s instructions and warnings

.

 

 

 

AVOID inhaling, ingesting, or coming into contact with any chemicals

 

KNOW applicable licensing and regulatory requirements 

for the chemical you plan to use. 

 

KNOW emergency procedures before handling chemicals.  

Carefully review “Chemical Accident 

Procedures” listed below and later in this manual.  Also see First Aid instructions on the chemical 
label. 

 

WEAR protective clothing, eye protection, and chemical resistant gloves

 when filling, using, and 

cleaning the sprayer. Wear additional protective gear, such as facemask or apron, as recommended on 
the chemical label. 

 

EXERCISE EXTRA CAUTION around children and pets.

 Pesticides are especially toxic to them.  

Keep sprayer and spray materials away from them at all times. 

 

DO NOT MIX OR POUR chemicals in an enclosed, unventilated area 

 

DO NOT USE flammable or corrosive chemicals

 in the sprayer. 

 

FLUSH the sprayer before switching chemicals 

in order

 

to prevent dangerous chemical interactions. 

 

STORE pesticides in a correctly labeled container and in a secure location

 

MONITOR the health of operators frequently exposed to pesticides

, as recommended by the 

chemical label or local/federal regulations.

 

 

Chemical Application Safety 

Before Spraying 

 

INSPECT and PREPARE sprayer before each use

 as directed in this manual. 

 

DO NOT TURN ON POWER to sprayer until ready to spray 

in order to avoid unintentional spray 

release.  

 

DO NOT SPRAY when wind speed exceeds 4 MPH

 in order to minimize spray drift.  

 

CLEAR work area of people/ pets and POST warning notices

 to restrict access for the period 

recommended on chemical label. 

 

KEEP sprayer and spray materials away from children/pets

.  Pesticides can be especially toxic to 

children and animals.  

 

DO NOT ALLOW anyone younger than 16 to operate the sprayer 

since pesticides are especially 

toxic to children.

 

 

During Spraying 

 

DO NOT OVER-APPLY pesticide

.  Apply at rate recommended by chemical manufacturer.  Excess 

pesticide can be dangerous to humans/animals, damage desirable plants, and contaminate soil and 
water sources. 

 

DO NOT EAT, DRINK, SMOKE, RUB YOUR EYES, or TOUCH YOUR BARE SKIN while 
handling chemicals and spraying

 

NEVER POINT A SPRAY GUN at people or animals.

 

Summary of Contents for 2287182































Reviews: