North Star 2287182, Owner'S Manual, Page: 15 / 30

Installation—2681101 and 26812101
15
Step Seven: Install rubber grommet (784519) into hole in
tank

Apply soap to rubber grommet.

Press grommet into the 9/16" hole in the sprayer
tank. Ensure the bottom lip of the grommet is fully
through the hole, and the top lip is flush with the top
of the tank.
Step Eight: Reinstall pump onto sprayer

Apply soap to bypass fitting on
regulator.

Press bypass fitting into the grommet.

Reinstall four screws through pump
feet and into threaded holes in the tank.
Step Nine: Reinstall hoses

Install fitting on inlet hose into inlet
port of the pump. To insert quick
connect fittings, lubricate O-ring with
water and twist fitting while inserting
into pump port. Slide red QC clip
closed.

Install gun hose onto 3/8" HB
elbow fitting in the front side of
the regulator. Secure with hose
clamp.
Fig06544
Fig06545