background image

 

Page 32 of 33 

Limited Warranty 

Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only 
("You'' or “Your”) that the North Star product purchased will be free from material defects in both 
materials and workmanship, normal wear and tear excepted, for a period of 

two years

 from date of 

purchase with the Honda GX engine having a period of three years from date of purchase. The 
foregoing warranty is valid only if the installation and use of the product is strictly in accordance with 
product instructions. There are no other warranties, express or implied, including the warranty of 
merchantability or fitness for a particular purpose. If the product does not comply with this limited 
warranty, Your sole and exclusive remedy is that We will, at our sole option and within a commercially 
reasonable time, either replace the product or product component without charge to You or refund the 
purchase price (less shipping). This limited warranty is not transferable. 
 

Limitations on the Warranty 

This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, 
misuse, or as a result of any accident or in any other manner; (c) damage from misapplication, 
overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration 
in any manner by anyone other than Us, with the sole exception of alterations made pursuant to 
product instructions and in a workmanlike manner. 
 

Obligations of Purchaser  

You must retain Your product purchase receipt to verify date of purchase and that You are the original 
purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make 
and model number, and follow the claim instructions that will be provided. The product and the 
purchase receipt must be provided to Us in order to process Your warranty claim. Any returned 
product that is replaced or refunded by Us becomes our property. You will be responsible for return 
shipping costs or costs related to Your return visit to a retail store. 
 

Remedy Limits 

Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty 
or any other warranty related to the product. We shall not be liable for: service or labor charges or 
damage to Your property incurred in removing or replacing the product; any damages, including, 
without limitation, damages to tangible personal property or personal injury, related to Your improper 
use, installation, or maintenance of the product or product component; or any indirect, incidental or 
consequential damages of any kind for any reason. 
 

Assumption of Risk 

You acknowledge and agree that any use of the product for any purpose other than the specified 
use(s) stated in the product instructions is at Your own risk. 
 

Governing Law 

This limited warranty gives You specific legal rights, and You also may have other rights which vary 
from state to state. Some states do not allow limitations or exclusions on implied warranties or 
incidental or consequential damages, so the above limitations may not apply to You. This limited 
warranty is governed by the laws of the State of Minnesota, without regard to rules pertaining to 
conflicts of law. The state courts located in Dakota County, Minnesota shall have exclusive jurisdiction 
for any disputes relating to this warranty. 

Summary of Contents for 163cc


































Reviews: