Page 19 of 33
Change BLADES SET
Check that the power trowel engine is turned off and cool before attempting to change the V-belt.
Changing the V-belt while the trowel is still hot or operating will cause injury.
Supplies: Blade Set, Bolt for Blade Set, Plain Washer for bolt, Spring Washer for Bolt,
1/2
” Spanner(or 13mm), Torque Wrench for 1/2(Including Socket)
Check that the blade arms are not bent or damaged before replacing the blade set. Replace
the arms first if they are bent.
1.
Place the power trowel on the flat floor.
2.
Twist the angle controller knob to the left until the blades are parallel to the floor (Fig. 1).
3.
Loosen the inner bolt with the 1/2 in. wrench (Fig. 2).
Summary of Contents for 163cc
Page 22: ...Page 22 of 33 Parts Diagram Handle...
Page 24: ...Page 24 of 33 Blade...
Page 26: ...Page 26 of 33 Gear Box...
Page 28: ...Page 28 of 33 Safety Ring...
