North Star 157204, Installation, Operation And Maintenance Manual

Page: 10 / 18

10
Maintenance Instructions
*Refer to the Honda Engine Owner’s Manual for Engine Maintenance Instructions
Maintenance Mode
Before performing any maintenance on the pressure
washer, it must be placed in maintenance mode.
A.) Turn off engine
B.) Turn off water supply
C.) Bleed water from system
D.) Shut off fuel valve
E.) Unplug spark plug wire from spark plug
Maintenance Schedule
What to Check When To Check What to Do
Inlet Filter Each Use Clean
Tires Each Use Check Pressure
Hoses Each Use Check for Wear
Bolts Each Use Check for Loose
Bolts
Cleaning The Inlet Filter
WARNING: Check whether dangerous chemicals
have been used, and take precautions when
handling filters.
A.) Unscrew inlet filter cap
B.) Remove Inlet filter mesh
C.) Run water though to clean mesh
Checking the Tire Air Pressure
A.) Remove air fill cap
B.) Check tire side wall for correct pressure.
C.) Replace air fill cap
Checking the Hoses
WARNING: Do not use a finger or skin to check for
leaks. Escaping fluid under pressure has sufficient
force to penetrate the skin, causing serious injury.
Do not operate the pressure washer if the hose is
cracked, worn, or leaking.
A.) Check all hoses for leaks
B.) Check all hoses of worn areas
Good
Bad
Bad
00426
Air Fill Cap
00425
Air Fill Stem
Wire Mesh
Water
Leak