27
north kiteboarding
bar 11 manual
5.
replacing parTs
5.3.
fitting the micro hook (micro loop upgrade kit) /
replacing the depoWer line
1.
remove the suicide ring from the safety line and pull it out of the iron heart iii.
2.
remove the u-shaped bolt at the roto head by using a small screwdriver as a leaver
and making little movements. if the bolt is seized, you can tap it out from the opposite
side with an awl or prickle.
3.
remove the plastic head with the depower line from the roto head.
4.
replace the damaged depower line or replace the plastic head with the Micro hook.
5.
Make sure that you insert the depower line properly.
6.
Move the depower line back and forth after inserting it before you put the u-shaped
bolt back in place.
7.
carefully tap the u-shaped bolt back into the holes at the roto head.
8.
Thread the safety line with the help of a thin line or a thin wire through the iron heart.
9.
attach the suicide ring with a lark’s head to the safety line.
1
2
3
4
5
6
7
8
9
Summary of Contents for Trust BAR 11
Page 1: ...BAR 11 ...
