- 19 -
3.Solar battery Description
Solar battery is installed to generate electricity by using light
energy and can store the generated energy into the built-in
battery. Usually the battery does not need to be replaced, but
after several years of use, its charging capacity will gradually
decrease and it can’t be fully charged. If you find that the
battery can’t be fully charged, you can only replace the battery
model as Panasonic (CTL1616); replacing the battery will delete
all the information in this watch memory.
Checking the battery indicator can display the battery power state
Power ultra-low indicator is used to represent the battery
power is very low. It will automatically enter the sleep state to
save power after flashing for 30 seconds. Press any key to
restore 30s flashing display, which remind you that you must
immediately place it in light for charging.
When the batteries run out, all functionality will be stopped.
After charging, every function can resume operation, but all
data stored in the watch will disappear. Therefore, after
charging to level M, you must reset the time and date, and
calibrate the hands and compass.
4.Operation caution:
When the watch is fully charged, in total darkness, it will run
about 1.5 months
After 1.5 months of storage in a dark place, the watch must be
charged at least above M level and re-setting the correct time
before use
Summary of Contents for EVOQUE
Page 23: ...EVOQUE USER MANUAL N S W EN...
Page 24: ......