North Edge EVOQUE, User Manual

Page: 15 / 24

- 15 -
Hold B key
for 2s
After 1 minute
Compass
measurement
Calibration mode Complete calibration
D/C key
Turn 2
circles
Compass Correction Mode (OFF CAL)
When the compass is first used, a correction is required as follow:
In compass mode, hold B key for 2s to enter (OFF CAL)
calibration mode. Pressing D or C key, then turn watch slowly,
clockwise or anticlockwise are both ok. After turning for 2 circles in
the same direction, the watch will exit calibration mode and return
to compass measurement mode. Note: After changing battery, the
first time you use compass, it will enter automatic calibration
mode. Please turn the watch more than two circles according to
the above method to calibrate compass.
In calibration mode, if no any key operation in 1 minute, it will
exit automatically and return to measurement mode
Note: When battery power is low, the system prohibits compass
function. If enter compass mode, press A key and low power icon L
level flash for 5s and can’t enter calibration mode.
N
S
W
E
N
S
W
E
N
S
W
E
N
S
W
E