Nortel R2MFC, Installation And Configuration Manual, Page: 54 / 114

54 Chapter 5 Configuring the R2MFC MBM
NN40010-300
5
Select all active B-channels that are provisioned for the corresponding E1 in Configuration >
Resources > Telephony Resources > Provisioned Lines . See Figure 20 .
There should be 30 channels, unless a partial E1 service is arranged with the CO.
See Figure 20 , for an example of the screen layout for an R2MFC MBM configured on Bus
2.0.
Figure 20 BCM lines configuration for R2MFC MBM
Configuring the PRI (internal) link using Unified Manager
1
Open the Unified Manager. See the Programming guide for the host system for an explanation
of how to use Unified Manager.
2
Click the Configuration button on the Unified Manager main page.
The Unified Manager main display opens.
3
Enter your Unified Manager login credentials.
4
Select the appropriate Bus # under the Resources > Media Bay Modules headings in the
navigation tree.
The Bus # information frame displays. See Figure 21 on page 55 for an example of the screen
layout for an R2MFC MBM configured on Bus 06.
5
Select Trunk module from the Programmed Bus Type drop-down list.