Page 40 of 80
Equipment description
553-2731-100
Standard 5.00
April 2000
The function switches provide for Speed Call, Autodial, Modem Call, Ring
Again and Release. These switches and the DDN switch (hookswitch) are
used to originate and to answer data calls. The top Reserved key (the one
under Ring Again) in conjunction with the “*” and “#” keys provide for the
ASIM automatic relocation feature.
The definitions of the Data Status lamps are as follows:
Configuration
The ASIM provides the interface between an RS-232-C compatible
asynchronous DTE through a DLC OR 4PDLC.
The connection to the DLC or 4PDLC is made via a miniature 6-position jack
mounted on the rear of the housing. The module is equipped with a 7 ft
(3.1 m) 6-conductor cord that is terminated with miniature 6-position plugs
on each end.
The connection to the power supply (120 V 60Hz ac input) is made with a
5-conductor cord equipped with a connector that plugs into the main
assembly of the ASIM.
The ASIM connects to the DTE through a 25-pin connector (that conforms to
ISO-2110) that is mounted on the rear of the housing.
Indicator
Description
CONNECT
The CONNECT LED lights when a call is connected
from the Meridian 1 through the ASIM to the attached
device.
DTR
The DTR LED lights to indicate that DTR is received
from the attached device.
RD
The RD LED lights when data is received by the ASIM.
SD
The SD LED lights when data is transmitted by the
ASIM.
