manualshive.com logo in svg

Nortel Passport 241-5101-200, Installation Manual

Share
Download
Nortel Passport 241-5101-200 Installation Manual Download Page 13

About this document   13

Passport 8250 Installation Guide   R2.2

•

...

Three dots in a command indicate that the parameter may be repeated
more than once in succession.

Symbol conventions

The following are samples of caution and warning conventions used in
this document:

Related documents

Documents related to the Passport 8250 are available from Passport and NMS
documentation suites.

Passport documents

See NTP 241-5101-201, Passport 8250 Command Line Interface Guide for
information on how to monitor and configure the Passport 8250 device using
the Passport 8250 command line interface (CLI).

WARNING

This warning informs you of risk of personal injury.

CAUTION

This caution informs you of risk of service interruption
or equipment damage.

CAUTION

This caution alerts you to the need to wear a grounded
antistatic wrist strap or equivalent protection to avoid
damaging electronic parts.

Summary of Contents for Passport 241-5101-200































































Reviews:

No comments

Brands by name

Popular brands

Load more brands