S p e e d D i a l
23
PROGRAMMING A SYSTEM-WIDE SPEED DIAL CODE
SHORTCUTS (continued)
Programming a name for the Speed Dial code (NOTE: To do this, Display digits must be set to
“No.”
1.
Press
≠.
2.
Enter the Speed Dial code for which you wish to change the name.
3.
Press
≠.
4.
Press
‘
three times.
5.
Press
CHANGE
.
6.
Use the keypad and
– –>
until the entire name is entered.
Confirming dialling restrictions
1.
Press
≠.
2.
Enter the Speed Dial code for which you wish to select a line.
3.
Press
≠.
4.
Press
‘
four times.
5.
Use
CHANGE
to change between
Y
(bypass restrictions) and
N
(do not bypass restrictions).
Ending the session
Press
®
. “
End of session
” appears on the display. After a few seconds, the display shows the date
and time.
ACTION
VISUAL DISPLAY
1.
Press
≠.
Speed Dial#:__
2.
Enter the Speed Dial code (from 001 to 255) you wish to
programme (for example, 001).
Speed Dial#:001
FIND
3.
Press
≠.
001:No number
CLR
CHANGE
4.
Press
CHANGE
.
001:___
CANCL
5.
Use the keypad to enter the exchange (for example: 0191 256
7843). The number can contain up to 24 digits.
001:01912567843
CANCL
BKSP OK
6.
Press
OK
.
001:01912567843
CLR
CHANGE
Summary of Contents for Norstar T7316E
